Salto BLUEnet Repeater.
The BLUEnet Repeater is the device that buys distance in a Salto wireless network. It sits between a gateway (or an IQ) and the locks and extends the range between them, so a real-time deployment can reach doors that are too far from the gateway, around structural walls, or down a long corridor. On larger or more spread-out buildings, repeaters are what keep every lock online without adding a gateway for every cluster. It is part of the wireless network design, placed where the survey shows a coverage gap, and it ships in white or black to blend into the space. Thick masonry, fire-rated partitions, elevator shafts, and long building wings all eat into wireless range, and a repeater is the inexpensive answer that avoids running fresh cable or standing up another full gateway. Each one needs only a power outlet, so positioning is flexible and can be tuned on site until every lock reports in reliably.
Specs
Integrations
BLUEnet Repeater connects to hotel PMS, guest-journey, and check-in platforms through Salto’s integration ecosystem, which is extensive and updated frequently. Rather than freeze a partial list, we point you to Salto’s own directory for the current set.
The repeater is wireless-network infrastructure; it carries the network signal and has no direct PMS integration.
Browse Salto’s integration directory →Decision aid
Not sure if BLUEnet Repeater is the right line for your property? The Salto Product Selector compares this against the rest of the Salto portfolio based on your property type and priorities.
Where we install BLUEnet Repeater
- HospitalityReaching far guest-room clusters and long corridors on Salto Space.
- CommercialFilling coverage gaps in large or structurally dense buildings.
Datasheets & documents
Manufacturer documentation for BLUEnet Repeater, straight from Salto.
Where BLUEnet Repeater fits, and where it doesn’t
Best for
- Reaching locks too far from the gateway or IQ
- Carrying signal around structural walls and down long corridors
- Keeping large or spread-out buildings online without adding gateways
Not ideal for
- Sites already within solid gateway range
- Replacing a gateway (a repeater extends, it does not connect to the cloud)
- Placement by guesswork rather than a coverage survey
Sourced from SALTO BLUEnet Wireless product page. Reviewed 2026-06-26 by RevKey.
Things to think about
Placed where coverage drops, not by the door
A repeater solves distance: too far from the gateway, a thick wall in the way, a long run down a wing. Where and how many you need comes out of the wireless survey, the same exercise that sizes gateways and nodes.
Sources: SALTO BLUEnet Repeater datasheet (PDF), SALTO BLUEnet Repeater product page. Reviewed 2026-06-26 by RevKey.
Next step: get a scope for BLUEnet Repeater
Send us your property details and we will come back with a real scope for a BLUEnet Repeater install, including phasing, brand-standard compliance, and a dated timeline.
BLUEnet Repeater: frequently asked
Is the Salto XS4 One good for high-traffic hotel doors?
Yes. XS4 One is a full ANSI mortise lock built for high-cycle guest-room and corridor doors. It runs roughly 60,000 openings per battery set, typically 24 to 36 months of service at hotel traffic. For very high-traffic main entrances it remains the right Salto choice over the compact XS4 Mini.
What is the difference between XS4 One and XS4 Mini?
They share the same credential stack (BLE, NFC, RFID, PIN), the same PMS integrations, and the same brand mobile-key compliance. XS4 One is a full mortise lock suited to high-traffic doors; XS4 Mini is a compact, indoor, lower-cost escutcheon best for value-tier and extended-stay rooms. When brand standards are silent and the door is high-traffic, XS4 One is the safer call.
Does XS4 One support Apple Wallet keys?
Yes. With 2024 firmware, XS4 One supports Apple Wallet room keys alongside BLE and NFC mobile credentials. RevKey confirms the exact firmware and brand mobile-key program your property is certified to before the order ships.
Can XS4 One be retrofitted onto existing doors?
On most doors with ANSI standard mortise prep, XS4 One drops in without millwork changes. If the door prep cannot be modified (occupied units, historic doors, custom millwork), a Neo cylinder swap is usually the better retrofit even though XS4 One is the stronger lock.